Directly driving a small motor

[Billm59]

I am attempting to drive a small 12VDC motor  (Globe model# 415A155-2). Using a PWM out @ 50% duty cycle I get approx. 12VDC on the output when no load is applied.  However when the motor is connected Nothing.  I am using T100MD-888+ which has a PWM out rating of 10A and the load resistance of the motor is about 8 ohms.  

SETPWm 1, 5000,500

[Billm59]

Whoops...A slight wiring error was the problem.  Once I reconfigured for current sourcing  things started working.

Bill