Author Topic: Can't get Version to load  (Read 10406 times)

Bill Lamey

  • Guest
Can't get Version to load
« on: July 22, 2005, 05:43:28 AM »
We have Version 4.12 ladder Logic + TBASIC software to program our E10-npn Controllers.

I can't get this software to install from disk... Everytime I run the "install" command, I get the following DOS error:

 'CHOICE' is not recognized as an internal or external command, operable program or batch file."

I tried downloading your free software, but just read that this does not allow downloading to the PLC...

Help?

Bill
506.459.4467

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3174
    • View Profile
    • Internet Programmable PLCs
Re:Can't get Version to load
« Reply #1 on: July 25, 2005, 10:55:40 AM »
You have probably tried to install it under Windows XP. Windows XP no longer support the "choice"  DOS command that previous MS-DOS or Windows uses. That's why you got the error messsage. In any case, DOS version of TRiLOGI cannot be used under Windows XP because Windows XP does not allow DOS program to take control of the serial port. You should upgrade to WinTRiLOGI version 3.5x which allows you to program E10 and H-series PLCs.  

For M-series PLC, the Internet TRiLOGI version  5.xx or above will run under all Windows operating systems.
Email: support@triplc.com
Tel: 1-877-TRI-PLCS