Internet PLC Forum
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Home
Help
Search
Login
Register
Internet PLC Forum
»
General
»
Technical support
»
LM335 IC sensor
« previous
next »
Print
Pages: [
1
]
Author
Topic: LM335 IC sensor (Read 13604 times)
Fernandz
Newbie
Posts: 10
LM335 IC sensor
«
on:
October 30, 2003, 02:41:03 PM »
What would be the best way to hook up a LM335 sensor to the analog inputs of the T100MD? Also what formula would i have to use?
«
Last Edit: December 31, 1969, 04:00:00 PM by 1076562000
»
Logged
support
Global Moderator
Hero Member
Posts: 3174
Re: LM335 IC sensor
«
Reply #1 on:
October 31, 2003, 10:08:40 AM »
Since the LM335 has output of 10mV/K, you can wire up the sensor such that its output voltage fall within the range of the PLC's analog inputs (0-5V for most PLC or 0-1V for 2 of T100MD1616+) and then you will be able to measure the voltage. The reading obtain is 0-4092 which can be scaled to units you want.
For other interface circuits for LM335, check with NS data sheet:
http://www.national.com/ds.cgi/LM/LM135.pdf
«
Last Edit: December 31, 1969, 04:00:00 PM by 1076562000
»
Logged
Email: support@triplc.com
Tel: 1-877-TRI-PLCS
Print
Pages: [
1
]
« previous
next »
Internet PLC Forum
»
General
»
Technical support
»
LM335 IC sensor