Author Topic: I need your help  (Read 9805 times)

GUSTAVO ACEVEDO DOMINGUEZ

  • Guest
I need your help
« on: June 01, 2004, 07:46:20 AM »
Sr I HAVE A QUESTION

COLD YOU TELL ME HOW I CAN DO A PROGRAM FOR
CONNECTING  MY PLC  IF I HAVE MY ADDREES IP AND MY GETWAY  :D

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3174
    • View Profile
    • Internet Programmable PLCs
Re:I need your help
« Reply #1 on: June 01, 2004, 07:56:03 AM »
I hope you are refering to TRi brand of PLC?  This forum is only for support TRi brand of PLCs.

You need to run the TLServer, then test the communication with the PLC using the TLServer's "Serial Port Setup". Once that is done, all you need to do is to run the TRiLOGI software client and enter the IP address of TLServer, or just 127.0.0.1:9080 if the TLServer and TRiLOGI  are both on the same computer.
Email: support@triplc.com
Tel: 1-877-TRI-PLCS