Timers

[marius]

I used one control panel and one T100MD-888+.
From the control panel I change values for timers using this code :

FOR I = 11 TO 19
SetTimerSV I-10, DM
NEXT

In the 1st Scan I use

FOR I=1 TO 9
DM[10+I] = GetTimerSV (I)
NEXT

When I cut the current and plug again the new values are lost.

Could you please tell me what I need to do for retaining values!

[support]

I wrote a program using your provided code. It worked perfectly when tested on a T100MD888+. You are setting timer 1-9 using data from DM[11] to [19]. After power on, make sure that your first part of the statement (which is SETTIMERSV) is not executed somehow before the 1st scan pulse execute the GetTimerSV(1).  Use a simple input to control a CF that execute the SettimerSV, then after power on reset the GetTimerSV will load the value into DM correctly.