Author Topic: Small quibble on Version 7.5 Build 14  (Read 19902 times)

garysdickinson

  • Hero Member
  • Posts: 502
  • Old PLC Coder
    • View Profile
Small quibble on Version 7.5 Build 14
« on: September 08, 2022, 02:12:25 PM »
The Print Dialog box gets overwritten with parts of the displayed .pc7 file after pressing on the "Print" button.

See attachment

Gary D

garysdickinson

  • Hero Member
  • Posts: 502
  • Old PLC Coder
    • View Profile
Re: Small quibble on Version 7.5 Build 14
« Reply #1 on: September 09, 2022, 10:16:21 AM »
I have another small quibble about the output from the Print Control Panel.

It has to do with the printing ladder logic that uses labels for contacts that are greater than 8 characters in length.  The issue is that the labels simply run together and are difficult to read.

I have attached a couple of screen shots, one showing what the i-TRiLOGI editor page looks like and the other the printout.

I couldn't find a way to decrease the size of the text used for the label or to increase the spacing between contacts in the ladder logic rung.

Is there something that I am missing?

Gary D

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3174
    • View Profile
    • Internet Programmable PLCs
Re: Small quibble on Version 7.5 Build 14
« Reply #2 on: September 10, 2022, 12:12:40 PM »
Thank you for your feedback. We will look into these reported issues and fix them in future release of i-TRiLOGI. Please continue to feedback to us any quibbles :)
Email: support@triplc.com
Tel: 1-877-TRI-PLCS