Hi, on base 0.htm page there are DM1 to DM4 values displayed, what directions should I take if I want to display a value from DM32 double register in one of display fields. My Nano-10 is collecting data from external Energy meter via Modbus where used energy counter is above 65565 so it clocked up next register by one. Im seeing 13885 and 1 in two registers, I also can see correct DM32 value in Nano just don't know how to change what type of register is displayed on HMI display (double instead of integer) and/or how to read DM32 in N.js file.Regards.