« previous next »
Pages: [1]

Author Topic: dual program  (Read 10640 times)

nyi myo thu

  • Guest
dual program
« on: April 08, 2002, 09:25:36 PM »
:)
Can i use the two program together in one plc.Then we switch these two program by one key.Now I using the dos version 3.1.

Thank you.
« Last Edit: December 31, 1969, 04:00:00 PM by 1076562000 »
Logged

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3174
    • View Profile
    • Internet Programmable PLCs
Re:  dual program
« Reply #1 on: April 09, 2002, 07:27:11 AM »
You can only transfer one program at a time to the PLC. But you can always have two separate section of the programs controlled by the [ILock] and [ILoff] interlock actions. So your switch can select one section to be active when switch = ON and another section to be active when switch = OFF. As long as there is sufficient program memory you can create as many sections as you like using this method. :)
« Last Edit: December 31, 1969, 04:00:00 PM by 1076562000 »
Logged
Email: support@triplc.com
Tel: 1-877-TRI-PLCS

culi

  • Guest
Re:  dual program
« Reply #2 on: July 25, 2002, 11:36:19 PM »
Similar question to the above....

I'm using your software just as a simulator - is there any way to use relays/inputs/outputs etc in different files to enable a complex program to be split into smaller parts (other than interlock)?

Thanks
« Last Edit: December 31, 1969, 04:00:00 PM by 1076562000 »
Logged

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3174
    • View Profile
    • Internet Programmable PLCs
Re:  dual program
« Reply #3 on: July 26, 2002, 08:58:35 AM »
Sorry,  the software does not work across multiple files.
« Last Edit: December 31, 1969, 04:00:00 PM by 1076562000 »
Logged
Email: support@triplc.com
Tel: 1-877-TRI-PLCS
Pages: [1]
« previous next »