TL7.12 Build 3

[jurg1505]

I have updated the software to version 7.12 Build 3.

With the new version i can not connect to a plc through a softether network.
I there something changed with the ports ?

With version 7.11 i had no problems.

Where can i download version 7.11 ?

[support]

What is "softether" network?

Nothing has been changed with the networking or port handling in version 7.12 build 3 so I don't think that is an issue. Is there any configuration setup to connect to the 'softether" network?

You can download the previous version in the same i-TRiLOGI upgrade page. Scroll down to this link on the page as shown in the attached screen shot

[garysdickinson]

I do have an issue with the documentation that pops up in the CF editor when you select the keyword, "Save_EEP#".  The attached screen shows the problem.

The title is "SAVE_EEP#(n)".  The problem is that SAVE_EEP# is a statement and not a function so the use of the "(n)" is nonsensical and the SAVE_EEP# accepts 2 variables, and value and a 32-bit index into the EEP data.

SAVE_EEP# is correctly documented in the TL7 reference addendum.  

However, if you attempt to get to this addendum from i-TRiLOGI 7.12 by Help->TL7 Reference Addendum you will get a 404 error with the following message, "Error 404 - Not Found
The document you are looking for may have been removed or re-named. Please contact the web site owner for further assistance."

i-TRiLOGI 7.12 is using the URL, http://www.triplc.com/TL7ReferenceAddendum.pdf, to access the addendum.  I'm betting that you wanted to point it at the .pdf that is in c:/TRiLOGI/TL7.

Best Regards,

Gary D*ckinson

[support]

Thanks for your report!

Starting from TRiLOGI 7.12 and 6.52 if your PC has internet connection, the help files will be loaded from the web site. But if you have no internet connection then the help files will be loaded from the local installed copy. This permits us to update the documentation (such as your reported issue) without requiring the user to re-install the program in order to get the corrected help files.

The TL7 Reference Addendum issue and the SAVE_EEP# that you have reported have been fixed. You will be able to get these help files from your current 7.12 and 6.52.

[garysdickinson]

Thanks for the quick response.  I know that these are small issues on a cosmic scale. But I appreciate your Your willingness to continue improving your products.

Best regards,

Gary D*ickinson