Initialization of DM and string

[Tito]

Hi, How to initialize:-
1) DM,
   do i have to put in loop and assign to -1?
2) String
   do i have to assign with ""   ?

thank you

[support]

If DIP switch #1 is OFF then all numeric variables are set to zero and all string variables are set to blank upon power on reset.

If DIP switch #1 is ON and your Nano-10 or FMD has FRAM-RTC then these data stays in the FRAM since it is non-volatile. In that case you will need to use a for next loop to assign values to whatever variables you need to set to a certain initial state.