« previous next »
Pages: [1]

Author Topic: LCD Bezel  (Read 17429 times)

Will Steed

  • Guest
LCD Bezel
« on: May 04, 2004, 08:10:02 PM »
Hi, just wanted to know if you could recommend mounting bezel's for your 4 X 20 and 2 X 20 LCD Displays.  I want to panel mount them, and I would like it to look fairly professional.

Thanks,


Will
Logged

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3174
    • View Profile
    • Internet Programmable PLCs
Re:LCD Bezel
« Reply #1 on: May 05, 2004, 11:23:52 AM »
Unfortunately there wasn't standard off the shelve bezel for the LCD420 and LCD216. The only model we have mounting bezel is the MD-HMI. For LCD420 and LCD216, typically the OEM will cut a rectangular hole on the panel and 4 mounting holes with counter-sunk chamferred so that the mounting screw can sink into the panel. Optionally apply a printed lexan cover on top of the panel to improve aesthetic.
Logged
Email: support@triplc.com
Tel: 1-877-TRI-PLCS

ohioan1

  • Newbie
  • Posts: 4
  • I'm a llama!
    • View Profile
Re:LCD Bezel
« Reply #2 on: March 22, 2012, 11:50:56 AM »
This was hard to find but found one.

http://www.dhmicro.com/plastic.html

http://digital-diy.com/forum/electronics-projects/acrylic-bolted-joints-and-cemented-windows-t2093.html

[Moderator's note] - Thank you very much. This is helpful information for our readers.
« Last Edit: March 22, 2012, 03:39:08 PM by support »
Logged
Pages: [1]
« previous next »