« previous next »
Pages: [1]

Author Topic: 0-10V analog from pwm  (Read 16069 times)

mijoe

  • Newbie
  • *
  • Posts: 3
  • I'm a llama!
    • View Profile
0-10V analog from pwm
« on: November 14, 2011, 01:30:45 PM »
I need to get a 0-10V analog output from Nano 10 PWM output.
What would be the best solution ?  I am thinking of using a voltage divider and capacitor.

Could you suggest a circuit?  Any help or suggestions would be appreciated.

Thank you. :)
Logged

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3174
    • View Profile
    • Internet Programmable PLCs
Re:0-10V analog from pwm
« Reply #1 on: November 14, 2011, 04:59:13 PM »
Texas Instrument has an excellent article on this topic:

www.ti.com/lit/an/spraa88a/spraa88a.pdf

Logged
Email: support@triplc.com
Tel: 1-877-TRI-PLCS

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3174
    • View Profile
    • Internet Programmable PLCs
Re:0-10V analog from pwm
« Reply #2 on: November 14, 2011, 05:00:41 PM »
You can also consider the FMD88-10 which has two channels of built-in DAC that can be configured for 0-5V or 0-10V output. FMD88-10 works identically as the Nano-10 except it has more digial and analog I/Os and a built-in LCD port.
Logged
Email: support@triplc.com
Tel: 1-877-TRI-PLCS

mijoe

  • Newbie
  • *
  • Posts: 3
  • I'm a llama!
    • View Profile
Re:0-10V analog from pwm
« Reply #3 on: November 15, 2011, 01:44:49 AM »
Thank you for your help.  We already use the FMD88 for other applications.  we want to use the Nano 10 in this case.

We will try constructing a filter as suggested in the TI article.

Logged
Pages: [1]
« previous next »