E10-npn+ Sequencer

[fwflowers]

I'm new to PLCs, and have been trying to add a sequence to my ladder program.  Every example I see uses the special function AVsec to initialize a sequence.  Since AVsec is not available for the E10, how do I set up its sequencer?  Can you provide a simple program example of a sequence that runs output 1 for 10 seconds, pauses for 2 seconds, and then runs output 2 for 20 seconds?  I would be most appreciative!

[support]

You can refer to the example "SEQTEST.PE3" which should be in the folder: TRiLOGI\WTL3\  folder. It shows how to use the counter to act as the sequencer stepper and control the outputs.

[fwflowers]

Thank you for your quick response.  I looked everywhere for that example, except in the most obvious place!

P.S.  Your product and your service are tops!

[support]

Thank you for your comments. We are glad you are happy with our products and services. E10 fills the requirement of simple, no frill equipment control. But if you want to do anything more sophisticated Nano-10 will be the ideal platform to control small equipment.