Author Topic: Nano-10: Resetting factory defaults with no comms.  (Read 12048 times)

K.Newton

  • Newbie
  • Posts: 17
  • I'm a llama!
    • View Profile
Nano-10: Resetting factory defaults with no comms.
« on: April 14, 2011, 02:59:30 PM »
Is it possible?

One of the other programmers here left one of our Nanos in some unknown state with an unknown IP address. I'm not really set up to do 485 with my machine right now.

I'm wondering if tere is some simple method of defaulting everything (including IP address) like setting a power up jumper like on a PC or something similar to that.

I am having zero luck at guessing the IP.

Sorry if this is covered. I tried a search with no useful hits on the subject with the terms I searched with.



support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3174
    • View Profile
    • Internet Programmable PLCs
Re:Nano-10: Resetting factory defaults with no comms.
« Reply #1 on: April 14, 2011, 03:32:11 PM »
Unfortunately that option is not provided. The only way to set the IP address without knowing what it is in the first place is to access it via RS485 adapter. You can order a U-485 adapter from us. It is very inexpensive and can be very handy for handling any devices that support RS485 port.
Email: support@triplc.com
Tel: 1-877-TRI-PLCS

K.Newton

  • Newbie
  • Posts: 17
  • I'm a llama!
    • View Profile
Re:Nano-10: Resetting factory defaults with no comms.
« Reply #2 on: April 14, 2011, 04:13:24 PM »
Thanks for the quick reply.