« previous next »
Pages: [1]

Author Topic: LCD 420  (Read 11019 times)

philipjoseph

  • Jr. Member
  • Posts: 57
    • View Profile
LCD 420
« on: February 10, 2003, 05:33:04 AM »
Do you know where can I find information about some special caracters that I can use with the LCD420?

I don't remember where do I find a table with some caracteres like CHR$(12)  No cursor at the screen.

Philip
« Last Edit: December 31, 1969, 04:00:00 PM by 1076562000 »
Logged
Philip.

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3174
    • View Profile
    • Internet Programmable PLCs
Re: LCD 420
« Reply #1 on: February 10, 2003, 07:08:41 AM »
You can download the full manual for the LCD from our webpage:

http://www.tri-plc.com/lcd.htm

or:

http://198.22.62.9/pdfs/Dmcman_full.pdf


Those special commands and characters table are in the manual.
« Last Edit: December 31, 1969, 04:00:00 PM by 1076562000 »
Logged
Email: support@triplc.com
Tel: 1-877-TRI-PLCS

philipjoseph

  • Jr. Member
  • Posts: 57
    • View Profile
Re: LCD 420
« Reply #2 on: February 11, 2003, 10:35:18 AM »
I found them.
They are at the T100MD+ manuel, section 4 (LCD module)
« Last Edit: December 31, 1969, 04:00:00 PM by 1076562000 »
Logged
Philip.

Richard Baum

  • Guest
Re:LCD 420
« Reply #3 on: June 13, 2004, 07:26:47 AM »
I looked in Chapter 4 (Command/Response Format) of the T100MD+ User's Manual and I did not find any reference to LCD Commands.  My manual is Copyright 2001.  Do I have an old copy without these commands?
Logged

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3174
    • View Profile
    • Internet Programmable PLCs
Re:LCD 420
« Reply #4 on: June 14, 2004, 06:01:31 PM »
Optrex has moved itself website IP address. So you should download the full manual from:

http://www.optrex.com/pdfs/Dmcman_full.pdf
Logged
Email: support@triplc.com
Tel: 1-877-TRI-PLCS
Pages: [1]
« previous next »