MDS100-BW 9600 Baud

[Petty_boy]

Hi Guys,

I'm still waiting for my 2424 to come back from repair but i would like to test the CPU's you sent over.

Can i use the TLserver and my RS485 convertor to test the baud @ 9600??

Marcus

[support]

Yes, you certainly can. TLServer also can compute the FCS for you, just enter the command string excluding any FCS, and click the compute FCS button to get the FCS, then add that to the command string followed by "*" and press the Enter key.

[Petty_boy]

Hi,

thanks for the reply.

Command string:-  PRINT #3 "?P0203";"PROJECT ID 090009"

FCS = 4C

String:- PRINT #3 "?P0203";"PROJECT ID 090009" 4C*

Is that right??

[support]

No, TLServer only supports the multi-point command. You do not put any of the TBASIC command. Only the text string itself.

E.g. Enter "@F0?P0102Testing" , click FCS button. It will return FCS=0C.

Now add 0C to the above string and the whole string is:

   @F0?P0102Testing0C*

Press Enter key to send it to the display.

[Petty_boy]

Ok thanks,

I'll give it a try and come back to you.

Cheers