Author Topic: MDS 100 DIMENSIONS  (Read 13825 times)

Petty_boy

  • Jr. Member
  • **
  • Posts: 53
  • I'm a llama!
    • View Profile
MDS 100 DIMENSIONS
« on: May 11, 2009, 03:13:17 PM »
Hi,

Are the MDS 100 mounting holes and LCD position dimensions the same as the LCD 420?

Thanks

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3174
    • View Profile
    • Internet Programmable PLCs
Re:MDS 100 DIMENSIONS
« Reply #1 on: May 11, 2009, 06:19:40 PM »
Yes, identical. Only MDS100 has a daughter board plugged in to the back of LCD420 instead of a ribbon cable. The LCD are of different models but the mounting holes are identical.
Email: support@triplc.com
Tel: 1-877-TRI-PLCS

Petty_boy

  • Jr. Member
  • **
  • Posts: 53
  • I'm a llama!
    • View Profile
Re:MDS 100 DIMENSIONS
« Reply #2 on: May 12, 2009, 01:54:39 AM »
Ok,

Thanks.

Petty_boy

  • Jr. Member
  • **
  • Posts: 53
  • I'm a llama!
    • View Profile
Re:MDS 100 DIMENSIONS
« Reply #3 on: May 13, 2009, 02:08:01 PM »
Hi,

Can you confirm the power consumption (W) at full brightness.

Cheers.

Petty_boy

  • Jr. Member
  • **
  • Posts: 53
  • I'm a llama!
    • View Profile
Re:MDS 100 DIMENSIONS
« Reply #4 on: May 17, 2009, 01:00:18 AM »
Hi guy's,

Any Idea of the power consumption?

Cheers

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3174
    • View Profile
    • Internet Programmable PLCs
Re:MDS 100 DIMENSIONS
« Reply #5 on: May 17, 2009, 01:10:19 AM »
It is about 0.12A at 24VDC or 12VDC with jumper ON.

Email: support@triplc.com
Tel: 1-877-TRI-PLCS

Petty_boy

  • Jr. Member
  • **
  • Posts: 53
  • I'm a llama!
    • View Profile
Re:MDS 100 DIMENSIONS
« Reply #6 on: May 17, 2009, 02:19:15 AM »
Great thanks.