« previous next »
Pages: [1]

Author Topic: Communication with CitectSCADA  (Read 14739 times)

tuong

  • Guest
Communication with CitectSCADA
« on: December 28, 2003, 11:24:48 PM »
Hi all

I'm Tran Cat Tuong from Vietnam,

Have anybody out there tried connecting T100MD+ PLCs with CitectSCADA via Modbus RTU / Modbus ASCII ?

Any information will be highly appreciated !

Thank you and best regards,
Tran Cat Tuong.
tuong@haison.com.vn
« Last Edit: December 31, 1969, 04:00:00 PM by 1076562000 »
Logged

Melin

  • Guest
Re: Communication with CitectSCADA
« Reply #1 on: January 11, 2004, 09:38:33 PM »
Hi Tran:

I test the unit with Citect using Omron protocol, and the test go very well.

Best Regards,
Melin
« Last Edit: December 31, 1969, 04:00:00 PM by 1076562000 »
Logged

tuong

  • Guest
Re: Communication with CitectSCADA
« Reply #2 on: January 12, 2004, 02:18:01 PM »
Hi Melin,

I'm very happy to hear about your achievement.

Could you show me the details ( the board, port ... forms ? )

Why don't you use Modbus as T100MD fully supports Modbus ?

Regards,
Tran Cat Tuong.
« Last Edit: December 31, 1969, 04:00:00 PM by 1076562000 »
Logged

Melin

  • Guest
Re: Communication with CitectSCADA
« Reply #3 on: January 15, 2004, 11:47:04 PM »
I tested with T100MD888+ because we have a network of omron PLC's with radiomodems and need stations with solar power (we are testing with T100MD888+ at 12VDC)

I'm using the Port of programming in Automode.

We test the modbus protocol when we finish the test with omron.

Bye,
Melin
« Last Edit: December 31, 1969, 04:00:00 PM by 1076562000 »
Logged
Pages: [1]
« previous next »