Turn off an output

[bl]

I was trying to find out where the option to turn off an output is but I couldn't find anything.I need an input to turn off given output.
Some help where exactly it is will be more than welcome. I am using Trilofi 6.22.
One thing that I noticed since using Trilogi-it is not very intuitive.

[philipjoseph]

If you use a NO contact (INPUT) in serie with the coil (OUTPUT). The ouptup will be on as long as the input is on.
Another way to control is using a dcus and use the TOGGLEIO function.
Check the Programming Manual.

[bl]

If you use a NO contact (INPUT) in serie with the coil (OUTPUT). The ouptup will be on as long as the input is on.

It will not work because any time when the input is OFF the output will be ON.
E.g. Power button-when it is OFF the given output/s will be ON.

[philipjoseph]

You have to use a normal open contact from input. The way as you said, looks like you are using a normal close contact.

[bl]

I need an input to turn off given output.

[support]

Use the [Latch] and [Clear] functions.