Author Topic: Turn off an output  (Read 14832 times)

bl

  • Newbie
  • Posts: 18
  • I'm a llama!
    • View Profile
Turn off an output
« on: February 03, 2009, 07:24:36 PM »
I was trying to find out where the option to turn off an output is but I couldn't find anything.I need an input to turn off given output.
Some help where exactly it is will be more than welcome. I am using Trilofi 6.22.
One thing that I noticed since using Trilogi-it is not very intuitive.

philipjoseph

  • Jr. Member
  • Posts: 57
    • View Profile
Re:Turn off an output
« Reply #1 on: February 09, 2009, 04:17:20 AM »
If you use a NO contact (INPUT) in serie with the coil (OUTPUT). The ouptup will be on as long as the input is on.
Another way to control is using a dcus and use the TOGGLEIO function.
Check the Programming Manual.
Philip.

bl

  • Newbie
  • Posts: 18
  • I'm a llama!
    • View Profile
Re:Turn off an output
« Reply #2 on: February 10, 2009, 06:13:19 PM »
If you use a NO contact (INPUT) in serie with the coil (OUTPUT). The ouptup will be on as long as the input is on.

It will not work because any time when the input is OFF the output will be ON.
E.g. Power button-when it is OFF the given output/s will be ON.

philipjoseph

  • Jr. Member
  • Posts: 57
    • View Profile
Re:Turn off an output
« Reply #3 on: February 11, 2009, 08:24:47 AM »
You have to use a normal open contact from input. The way as you said, looks like you are using a normal close contact.

Philip.

bl

  • Newbie
  • Posts: 18
  • I'm a llama!
    • View Profile
Re:Turn off an output
« Reply #4 on: February 11, 2009, 02:13:05 PM »
I need an input to turn off given output.

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3174
    • View Profile
    • Internet Programmable PLCs
Re:Turn off an output
« Reply #5 on: February 11, 2009, 06:42:38 PM »
Use the [Latch] and [Clear] functions.
Email: support@triplc.com
Tel: 1-877-TRI-PLCS