Internet PLC Forum
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Home
Help
Search
Login
Register
Internet PLC Forum
»
General
»
Technical support
»
TBasic Command to Get PLC Address
« previous
next »
Print
Pages: [
1
]
Author
Topic: TBasic Command to Get PLC Address (Read 12949 times)
ccdubs
Full Member
Posts: 116
TBasic Command to Get PLC Address
«
on:
November 26, 2007, 07:13:24 PM »
Hi,
Does anyone know if there is a TBasic command that returns the address of the PLC that the software is loaded on to?
Thanks
Logged
support
Global Moderator
Hero Member
Posts: 3174
Re:TBasic Command to Get PLC Address
«
Reply #1 on:
November 26, 2007, 10:25:26 PM »
You can use the TBASIC command "Status(
" to find out the ID address of the PLC.
Logged
Email: support@triplc.com
Tel: 1-877-TRI-PLCS
ccdubs
Full Member
Posts: 116
Re:TBasic Command to Get PLC Address
«
Reply #2 on:
November 27, 2007, 06:26:37 PM »
Thanks for the help.
A useful thing to know for others is that the Status(
command will only update the ID when the PLC has been de then repowered. This is if the ID has been changed in between.
Logged
Print
Pages: [
1
]
« previous
next »
Internet PLC Forum
»
General
»
Technical support
»
TBasic Command to Get PLC Address