Author Topic: Connecting with another PLC  (Read 12135 times)

lemod

  • Guest
Connecting with another PLC
« on: March 29, 2007, 11:46:22 PM »
Hi,
I'm using T100MD888+. Is it possible to exchange some date between my PLC and GeFanuc 90-30. Both PLC's operate MODBUS protocol and have ethernet module. So, can i use MODBUS or Ethernet module or something else. Please help me.

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3174
    • View Profile
    • Internet Programmable PLCs
Re:Connecting with another PLC
« Reply #1 on: March 30, 2007, 07:15:49 AM »
You can use the READMODBUS and WRITEMODBUS command on the T100MD888+ to communicate with any other MODBUS slave provided the GeFanuc also has the RS232/RS485 port.

Alternatively, if the GEFanuc can be the MODBUS master (I am not sure if that is possible) than it can talk to the T100MD888+ as the MODBUS slave.

Since XServer doesn't support MODBUS/TCP you can't use MODBUS/TCP on the ethernet in this case.
Email: support@triplc.com
Tel: 1-877-TRI-PLCS